Characteristic:
•
Entrance brake tester, easy upgrade with
. options for brake force difference display
(LCD)
. and result printout
• No
bulky control cabinet because all testdevices . have electronic onboard
• Galvanised testdevices meet highest quality
. requirements
• BNET fieldbus enables easy upgrade with
. PCSoftware, suspension and sideslip tester
• Fully automatic test procedure, operation by
. start/stopkey or infrared remote
control (option)
• Outdoor
installation possible
• Individual
installation planning because of
. flexible
cable length (30m BNET fieldbus cable
. in the delivery set)
Tehnical
data:
Basic Data:
• Dimensions:
W x L x D (mm) 2360 x 660 x 250
• Weight approx.: 420 kg
• Friction value dry: 0.8
• Friction value wet: 0.7
• Roller length: 700 mm
• Roller diameter: 205 mm
• Largest test width: 2200 mm
• Smallest test width: 800 mm
• Elevation of rear rollers to front rollers: 25 mm
• Height
difference roller upper edge front
to shop
. floor:
– 10 mm
• Smallest testable wheel diameter:
. ~ 320 mm (10’’)
• Largest testable wheel diameter:
. ~ 800 mm (20’’)
• Permissible test axle load: 2500 kg
• Permissible max. driveover load: 4000 kg
• Maximum braking force per wheel: 5 kN
• Noise
emission: LwA <75 dB (A
Roller
Surface:
• Expanded metal DIN 791 (rib mesh)
. mesh length: 62 mm
• Mesh width: 21 mm
• Bar thickness: 2 mm
• Bar width: 2.5 mm
• Rib mesh thickness: 2 mm
• Plastic corundum coating of interstices
. with plastic
• Plastic coating approx:. 1 mm over rib mesh
• Grain size: 2.0 to 3.2 mm
• Roller colour black
Performance
Data:
• Voltage
supply: 3 x 400VAC / 9.8A / 50/60 Hz
• Fuse supplied: 3 x 20Z / C 3pin (400V)
• Feed line supplied: 5 x 2.5 mm? (400V)
• Test
speed: 2.4 km/h
• Nominal output of the drive motors: 2 x 2.0 kW
Optional
230V:
• Voltage
supply: 3 x 230VAC / 17A / 50/60 Hz
• Fuse supplied: 3 x 25A / C 3pin
• Feed line supplied: 4 x 2.5 mm
Environmental
Conditions:
• Protection
class:
. (according to DIN 40 050) IP 54
• Permissible humidity (relative without
. condensation):
up to 85%
• Operating temperature: 10 to +60 °C
• Storage 10 to +60 °C
