 |
 |
 |
 |
 |
 |
oKOCH, servisna oprema, d.o.o.
oŠpruha
42
oSI-1236
Trzin
oSlovenia
oTel:
+386 1 56 44 770
oFax:
+386 1 56 44 772
oGsm:
+386 41 638 609
oaleksander.presekar@koch.si
o |
|
|
|
Hardware
• Galvanised roller set for optimal corrosion protection
• Testing width 800 mm – 2200mm or 2800 mm
• Automatic re-start of the rollers for exit of vehicle
• Splash proof roller drive motors (IP54)
• Drive off aid through self locking worm transmission
• Industrially tested CAN-BUS-System
• Maintenance free, top precision DMS measuring system
• Long lasting and tyre friendly roller coating
• Automatic error check and zero point calibration
• Fully automatic time delayed start of the rollers
after driving onto the test stand
• Automatic stop after reaching the configurable slip threshold
• Automatic stop after exiting brake tester
• Single wheel testing (optional)
• Permanent measurement and saving of all
measured values
• Program controlled evaluation of all values
|
Characteristic:
Test lanes in the direct reception of car dealers belong already for a long time tothe basic equipment and daily tool of the
service personal. In this environ- ment it supports primarily the communication with the customer.
During the reception of a vehicle, the most important factor is to communicate to the customer jobs that are required while he is there watching. This portrays technical know how and genera-tes a degree of transparency and trust between all parties. After repairs, the customer can observe the difference in readings thus promoting customer satisfaction and increasing the prospect of him returning again.
The general inspections
(GI) can all be completed using a test lane as well as having the added bonus of it being fast and reliable. |
Technical help:
Test lane:
| Model |
NTS 800 |
NTS 810 |
NTS 815 |
| Permissible axle weight |
2000 kg |
2000 kg |
2000 kg |
| Min. testing width |
800 mm |
800 mm |
800 mm |
| Max. testing width |
2200/2800 mm |
2200/2800 mm |
2200/2800 mm |
Side slip tester:
| Model |
NTS
800 |
NTS
810 |
NTS
815 |
| Max. axle load |
2500 kg |
2500 kg |
2500 kg |
| Values (m/km deviation) |
-15 do +15 |
-15 do +15 |
-15 do +15 |
| Resolution (m/km) |
0,1 |
0,1 |
0,1 |
Suspension tester:
| Model |
NTS
800 |
NTS
810 |
NTS
815 |
| Max. axle load |
2000 kg |
2000 kg |
2000 kg |
| Max. wheel load |
1000 kg |
1000 kg |
1000 kg |
| Measured values (road grip) |
0-100 % |
1-100 % |
2-100 % |
| Oscillating travel |
6 mm |
6 mm |
6 mm |
| Oscillating frequency |
25 Hz |
25 Hz |
25 Hz |
Brake tester:
| Model |
NTS
800 |
NTS
810 |
NTS
815 |
| Permissible axle weight |
3000 kg |
4000 kg |
4000 kg |
| Range of measurement |
5 kN |
6 kN |
8 kN |
| Test speed |
3,3 km/h |
5 km/h |
5 km/h |
| Roller coating |
plastični in SiC |
plastični in SiC |
plastični in SiC |
| Max. motor power |
2 x 2,5 kW |
2 x 3,5 kW |
2 x 4 kW |
| Roller diameter |
200 mm |
200 mm |
200 mm |
<< back to page Test lane and Brake testers
|
|
