|
DIESEL
TESTING EQUIPMENT EPS
As the biggest manufacturer
of diesel injection technology, Bosch also provides the
necessary workshop test technology for testing and adjusting
these injection systems.
|
|
|
Indipendend Bench RABOTTI TEC 100
Indipendend Bench that allows a complete and a accurate test of multibrand common rail injectors and pumps. (Bosch,Siemens, Delhi, Denso).
In the pc with the suitable software that manages completely the Bench, there is database with parameters of pumps and injectors that can also be updated by data transmission; moreover it’s possible memorizate and stamp reports. It’s also possible to carry out tests on pumps and electroinjectors setting up parameters of pumps regulation of pumps and pilotage of electroinjectors.
Following there are automatic tests that can be executed :
• for pumps: Cranking – Pressure loss – Efficiency (if pump is equipped of transfer pump, it’s possible to verify the aspiration);
• for injectors: Back flow, Pre Injection, Cranking (low rotation speed), Middle rotation speed, Maximum rotation speed;
• for pump’s DRV: Continuity (test on the electrical circuit), Functionality (test on the operation).
Main characteristics are: High pressure System to the 1800bar, assembly to 6 injectors, predisposition lubrification pump, measure of the temperature income and escape oil, four gauges for: low pressure income, low pressure escape, internal pressureand check aspiration. |
|
|
More service in a compact format: EPS 200 with
automatic test sequence
The
automatic, safe and economic way to test diesel components
• Compact worktop tester for every workshop
• Excellent economy
with automatic test sequences
• Easy use by touch
screen
• Integrated database
for filing test specifications and customer data
• Delivery-quantity-based
injector tests
• With integrated suction
and purging program/device for
. common-rail injectors
|
|
|
DETEQ
- COMMON RAIL injector testers
Solution for testing diesel common rail
systems. For all typs of injector.
The device has a generator of signals, wich generate corresponding signal
on injector rank. The device is also appropriate for testing two-stage
injector.
|
|
|
Injection-nozzle testers BOSCH EPS
100
Bosch injection-nozzle testers are required when the opening pressure of
injection nozzles has to be tested and adjusted, the spray jet has to be
analysed in terms of its shape and atomisation and the tightness of the
nozzles and chatter properties checked. The injection pumps involved here
are basically designed for manual operation.
•
Version with volume correction and higher accuracy,
. as per ISO 8984 standard:
• for test pressures up to
40 MPa
• for testing P, R, S and T
size nozzles
|
|
|
|
BOSCH Mesauring tools for mesauring low and high pressure on common rail sytems.
|
|
|
