 |
 |
 |
 |
 |
 |
oKOCH, servisna oprema, d.o.o.
oŠpruha
42
oSI-1236
Trzin
oSlovenia
oTel:
+386 1 56 44 770
oFax:
+386 1 56 44 772
oGsm:
+386 41 638 609
oaleksander.presekar@koch.si
o |
|
|
|
Inground post lift for heavy-duty vehicles
Nussbaum Omni
Lift UFQ UFX
|
|
OMNI LIFT – Flexible and comfortable lifting of trucks and commercial vehicles
The column automotive lifts underfloor of the OMNI LIFT series developed by NUSSBAUM with their quadratic columns lift commercial vehicles up to 15t axle load.
„Quadratic – handy – good“
The quadratic lifting columns offer perfect torsion protection. Because of the telescopeable lifting columns a maximum installation depth of 1550 mm is necessary.
The lifting columns enable a ceiling/cover installation.
One OMNI LIFT equipment – 1 to 10 lifting columns
The OMNI LIFT equipment can consist of 1 to 10 lifting columns. These lifting columns positioned in row offer an optimum of applications. Optional the lifting columns can be electrically moved in drive-on direction. Thus a wheel base up to 4030mm can be reached
|
Operation
Every lifting column has an independent hydraulic power unit with a low noise oil-submotor. Those motors can be integrated underfloor in the box. A single operation of the lifting units via pendant operation or touchscreen is possible.
Flexible support – floor level and traversable
Traversable support with different support pieces allow the support
of expanded truck vehicle pallets. The support with traversable
rolling shutter covers can be installed at floor level.
Safety with SST (Safety Star Technology)
The synchronization of the lifting columns is warranted by the
integrated safety system SST patented by NUSSBAUM. The SST
system ensures the electronical synchronization of all lifting units
Look at:
• Catalogue
Omni Lift |
Technical data:
| Model |
Omni Lift |
| Capacity per column (t) |
15 |
| Diameter of column (mm) |
250 |
| Outer diameter of column (mm) |
300 |
| Lifting height (mm) |
1800 |
. Lifting height inner column (mm)
|
900 |
. Lifting height outer column (mm)
|
900 |
| Installation depth (mm) |
1550 |
| Lifting time approx. (sec) |
70
|
| Lowering time approx. (sec) |
55
|
| Distance between several columns |
|
. min. (mm)
|
2400
|
. maks. (mm)
|
7100 |
| Oil filling on site per lifting unit (l) |
27
|
| Motor
(kW) |
3
|
| Power supply (V/Hz) |
400/50 |
|
|
<< previous ................................................................................................................... next page >>
<< back to page Lifts
|
