Characteristic:
Uni Lift 4000 Plus BMW – functionality and safety
The Uni Lift 4000 Plus BMW was special developed together with BMW‘s specialists and after BMW‘s requirements. The lift works unter approved Master-Slave priciple and safely lifts up passenger cars up to 4.000 kg.

Wheel-alignment for highest precision
The BMW requested accuracies between left and right runways of maximum ± 0,25 mm and also between front- and back-end of runways, as the case may be diagonal of maximum ± 0,5 mm, which Nussbaum has exactly fulfilled these specifications.

Sliding plates
The precision sliding plates, which are on roller bedded, can be twisted with weight of 1.000 kg, 5 Nm and sideways slid. The sliding plates are special flat, total drive-on height of the runways is 235 mm.

Compensating elements
Easily movable compensating elements at position of turntables, for balancing the different heights of runways. At its underneath, plastic sliding knobs are mounted, it avoids damages of paited surfaces and creation of corrosion.

Ergonomic and time optimized works
The automatic floor compensation is equipped with stairs, which works with a hydraulic system. The stairs can be driven on at closed position without any problem. Through an individual and fast automatic floor compensation, guarantees flexible works at vehicles. It
is possible for several motor mechanics to work at the vehicle at the same time. No continuously lifting and lowering of the lift is neccessary during measuring and positioning. The lift and floor compensation can be lifted and lowered separately of each other.

Look at:
• Catalogue Uni Lift 4000 BMW