Characteristic:
TC 410 The fully automatic tyre changer for the professional tyre service! Suitable for tyres of passenger cars, motor bikes and light trucks
with a rim diameter of 12” to 26“ and rim width of 340 mm. The height of the turntable can be adjusted. There are 2 different working positions, thus the most ergonomic working position can be
chosen. The mounting head is pneumatically adjusted at the rim in vertical and axial direction.
The TI (= tyre inflation) version enables to fill tyres by injecting pressurised air between bead and rim. Via 4 bores in the four rim clamps compressed air is forced between the rim and the tyre. Special
covers for the protection of alloy rims are part of this package.

Basic equipment
• Self-centering four-jaw chuck
• Turntable with two pneumatic cylinders
• Pressure regulator with water filter & lubricator
• Safety valve (tyre pressure max. 3.5 bar)
• Clockwise and anticlockwise rotation of turntable
• Plastic protectors for mounting head, jaw chucks, bead breaker, tyre lever

Technical data:

Model	TC 410
Inside clamping range (inch)	14" - 26"
Outside clamping range (inch)	12" - 24"
Rim width (inch)	3" - 13"
Max. tyre diameter (mm)	1030
Bead braking range (mm)	50-140/100-400
Working pressure (bar)	8 - 10
Mains Voltage (V/Hz)	400/50