Convincing advantages of the system
• Reduction of operator vehicle contact which is kept to a minimum.
• No fixing of any kind of bracket on wheels required – no pre-preparation!
• Extremely high repeat accuracy on
measurement values.
• Innovative caster measurement process called
• Microsweep that literally give results with a ¼ hand over hand turn of the steering wheel.
• Automatic wheel compensation run out procedure.
• Non touch measuring technology with colour coded triangulation provides highly accurate results as they are not affected by any contact with either the tyres or rims.
• The short time it takes to complete a measurement enables the job to be given either free of charge or for a low price enhancing the image, service and customer relations of the workshop.
• The WAB 02 CCT simply enables a complete wheel alignment measurement to be carried out at the workshop reception.
• The workshop owner would be able to increase the amount of measurements and thus increase his net income for alignment jobs.

Characteristic:
Colour coded optical CCT measuring technology revolutionises Wheel align-ment in the workshop. Up till now, wheel alignment has always been one of the most challenging daily jobs in the work-shop. This is mainly due to the costs involved in having specialised personnel available coupled with the risks when
it is found that the measured vehicle
does not require adjustment.

Due to these factors, alignment is normally only carried out when visible signs indicate bad tracking such as
uneven wear on tyres or steering wheel misalignment.

Routine alignment checks on reception of vehicles have not really been a viable opti-on apart from using the WAB 01. The non contact WAB 02 has gone a step further to present a system that revolutionises the wheel alignment industry.

Through the amalgamation of the fully automatic compensation process on the WAB 01 coupled with the high end non touch measurement system, it paves the
way for standard alignment inspections at workshop receptions.

Look at:
• Catalogue Wheel aligner WAB 02 CCT